How To Wrap An Extension Cord – A Complete Guide

How To Wrap An Extension Cord

Extension cords are essential on a work site. The one thing that work contractors are amazing at is the storage of extension cords. They do it so perfectly that you will die for their killer skills. Do not worry if you are experiencing troubles with it.

The article will help you with this. It will provide you with an effective guideline, several techniques and tips on wrapping an extension cord.

Step-By-Step Guide On How To Wrap An Extension Cord

Below are the steps you need to follow.

  1. The initial step is for you to entangle any mess present. Once you do that, stretch out the cord to begin the wrapping process.
  2. Open up your palm, and let it face upwards. Then, drape the cord over the open palm. It would help if you left the cord end longer than the folds or loops you plan to make.
  3. Utilize your free hand to pull the cord at an arm’s length accordingly. Drop the cord into your palm of your hand for this initial way.

Go back in the alternate direction and make two equal loops that will hang on each side of your palm. But, they should not be longer than the cord end that is hanging down.

  1. When you approach the last end of the cord, leave it longer than the other loops of the other side. Also, the length should be adequate to allow the cord end to hang below the loops.
  2. Then, grab that last longer loop and fold once or even twice beneath the palm. Let it back through to the position of your hand.
  3. You can use the loop you brought out to hang out the extension cord. Or, you might spread out the whole loop. Then, pull out the top of the overall cord to keep everything in place. Hang the cord that houses all the other loops and hook it up.

Techniques On How To Wrap An Extension Cord

Having troubles with how to fold your extension cord neatly? You can comply with the techniques below for you to store and readily utilize your extension cord easily.

1. The Over-Under Method

This technique is probably the most popular way on how to preserve your extension cords. Its visual presentation may not be quite appealing as the contractor does it.

It folds your cord in a way that makes it easier to unravel when rushing from one room section to another.

Read on how to grasp this technique.

Begin at one end of your extension cord. Make a tight pulling and ensure your hands are at least 3 inches apart. Your left arm needs to face upwards, and your right arm should conversely face downwards. This will enable your thumbs to face in a similar direction.

As you do that, bring the extension cord in your right palm of your hand and pass it over the left palm.

The cord should naturally loop itself if you strictly follow the steps outlined so far. In case of any twists, you can twirl the cord until the twist agree to fall out.

Now, pick the tail and hold it with your right hand. Ensure your palm is facing upwards. This will enable your thumbs to face in opposite directions.

Make a turn over your right hand. Your palm is now facing in a downward direction. Then, transfer the cord over to your left hand.

Redo the steps above. Wind over for a single loop and still under for the next loop. Do this until the whole cord is completely wound.

This process is as simple as walking in the park. It will allow the extension cord to uncoil easily with no tangles. The Over-Under method is quite quicker than when using your elbow.

One advantage of using this method is that it leaves no damages to the extension cord. However, you will need to practice the Over Under method often and get used to it.

2. The Contractor’s Wrap

The Contractor’s Wrap technique is another simple technique that will ensure you easily detangle your extension cord and hang it neatly in the storage room.

For those who are good at crocheting, this technique might be your cup of tea. Mostly, you begin by doubling the cord, therefore halving the wrapping time. It is certainly worthwhile your time.

To achieve this, follow the steps below for a successful wrapping.

In the Contractor’s Wrap, you also need to first remove any tangles in the cord.  Then, connect the female end of the extension cord onto the male end.

After combining the different ends, do your best to find the middle part of the extension cord. Once you locate the middle part of the cord, hold the section 6 to 8 inches from the loop base. You need to face out your palm and ensure the loop endpoints upwards.

Rotate your hand for the palm to face in your direction. The loop end this time will point downwards.

Take a firm grip of the loop with one hand. Use the other hand to push the cord’s tail part through the loop to the back’s front direction.

Now, you need to have the first loop of your chain. You can adjust the loop size to your desired taste. You can achieve that by sliding the end of the loop upwards or downwards.

Take a grip on one end of the new loop. Try to reach through the front direction to grab the tail end of the extension cord.

Position the tail in an upward direction to attain at least 6 to 8 inches above the initial loop. This way will help create the second loop.

Adjust the cords as you do the winding to attain even lengths of the loops.

Upon pulling a single loop through the next, move downwards to go for the tail. Pull your next loop up to the last one. It would be best if you kept doing this until you loop the entire length of your cord into a chain.

Once done, store the cord by hooking it up on a wall. Or, you can wrap it up and store it on the shelf.

3. The Elbow Wrap

This is probably the default method for most of us. It requires you to grip the extension cord end in one hand. Then pull it out around the elbow’s same arm and begin whipping it around. You can make it as tight as possible.

With the loose end, make the coil into a pile so that it effectively tangles itself. Or, you can wrap the end on the coil and stress the extension cord.

You might face hurdles when wrapping your extension cord using this method. The cord may make tight curves during the stressing.

The primary advantage of the elbow wrap is that it is simple. Also, it is budget-friendly; you do not need to purchase any equipment. However, the method contributes many tangles, making it difficult to utilize the extension cord the next time you are on a worksite.

4. The Braid Wrap

Double your extension cord over and make a loose knot at the end. While working towards the other end, wrap the cord below the loop in the knot to make a newer loop. You can proceed with this all the way until you reach the end.

Top Tips And Tricks On Working With Extension Cords

Here are some tips that will help you save some time and money.

1. Hang high

While high at a ladder or roof, create a loop in the cord by simply making an overhand knot. Utilize the knot to support the heavier part of the cord that is dangling on the ground.

You can use a nail or a peg to hook the extension cord. This will make work easier for you, rather than troubling yourself with the cord worth several pounds.

2. Place your cord in a bucket

When you need electricity, and the nearest outlet is miles away, you can opt for an extension cord bucket.

An extension cord bucket is a bucket, around 5 gallons, with a hole inside closer to the bottom. It has a heavy extension cord that is coiled inside. The male end of the cord sticks out of the hole, some feet away to an outlet.

Plug the male end into a GFCI-protected receptacle. Then, grip the female end of the cord and began strolling. No kinks or tangles will form.

3. Assemble your short-length cords with tools

You can keep your shorter extension cords with the most-frequently-used tools. It will add convenience while at the working site.

During purchase, look for 14-gauge extension cords that have additional spots for plugging in.

4. Speedy Wrap

You can fold your extension wrap by gripping both ends of the cord into a loop. When you are almost at the end, you can wrap the remaining loop into the middle part of the coiled loop and make a smaller loop.

5. Run your cords alongside buildings

While at construction, ensure to tuck your cords alongside a building for increased durability. This will shun it from getting tripped on or passed across by the wheels of a truck.


Knowing how to wrap an extension cord will save you a lot of tangle frustration and dollars as well. The article has spotlighted the stunning guideline, methods and tips on how to fold an extension cord.

By following the insightful information, nothing will hold you back from wrapping a cord like a pro.


Please enter your comment!
Please enter your name here